Recent Posts

Hose Restraints

Published December 14, 2014 | By winunited

Hose to Hose Whip Check
Selection

  1. Determine the hose I.D. (Inside Diameter).
  2. Determine assembly working pressure in PSI.
  3. Select the proper cable from the Hose Restraint Section (Win United 2014 Catalogue).

Example: Secure hose to the adjoining hose – Hose to Hose style

  • Hose I.D.: 11/2″
  • Working Pressure: 125 PSI
  • Safety Cable required: WU-RS-1103

Hose to Hose Whip Check
Installation

  1. Open the cable loop on one end and slide it over the coupling of one hose.
  2. Open cable loop on the other end and slide it over the coupling on the other hose.
  3. Connect the hoses.
  4. Remove slack by sliding cable loops as far apart as possible and equidistant from the connection.

Note: Under no circumstances should the assembly working pressure or working temperature exceed the working pressure or working temperature of the lowest rated component  coupling, clamp, ferrule, or hose).

restraint